Edge 540

FEATURES: Construction: Balsa and ply with prehinged ailerons and rudder and
airfoiled control surfaces, motor box preinstalled with blind nuts
providing perfect spacing for spinner backplate-no need for
measuring, cowl ring also preinstalled
Wings: Two piece with carbon fiber wing joiner and single screw
attachment
Motor Mount: Built-up plywood
Covering: Top Flite MonoKote
Aileron Control: Dual servo
Cowl: Prepainted fiberglass, attaches with rare earth magnets
Canopy: Clear, single
Wheel Pants: Prepainted ABS
Landing Gear: Prepainted aluminum 0.079" (2mm) thick
Wheels: Two foam 1.75" (44mm) diameter
Spinner: Red plastic, 1.75" (44mm) diameter
Hardware: Full set included
Building Time: Approximately 4-6 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
date of purchase.

INCLUDES: ElectriFly ARF Edge 540 3D Aerobatic Airplane with fiberglass cowl,
ABS wheel pants, landing gear, wheels, hardware, photo-illustrated
instruction manual and two decal sheets

REQUIRES: Radio: 4 channel
Servos: 4-micro
Dual Servo Extension: For aileron servos
6" (150mm) Slim Extension Wire: Two
16" (400mm) Servo Extension: Two
Motor: Rimfire 35-30-1250 outrunner
35A ESC for Brushless Motors:
Battery: LiPo 1500mAh 11.1V
Cell Balancer: For LiPo battery,
Battery Charger: LiPo compatible
Propeller: 10x7E

SPECS: Wingspan: 41" (1040mm)
Wing Area: 353 sq in (22.9 sq dm)
Weight: 29 - 32.0 oz (820 - 910g)
Airfoil: Fully symmetrical, mid wing placement
Wing Loading: 11.8 - 13.1 oz/sq ft (36 - 40 g/sq dm)
Length: 39.5" (1005mm)