Eratix 3D

Key Features

• Capable of sport-to-extreme 3D aerobatics
• Generous wing area and light wing loading for superb slow flight response
• Specially designed, machined, 3D control horns
• Lightweight, open-structure airframe design
• Top quality, laser-cut balsa and lightweight plywood materials
• Firewall accepts E-flite® Power 25 or Power 32 brushless motors without modification
• Tough, lightweight aluminum landing gear with factory-painted fiberglass wheel pants
• Factory-painted fiberglass cowl
• Easy-access magnetic battery hatch
• Ground clearance optimized for a wide range of prop sizes
• Steerable tail wheel

Overview

The E-flite® Eratix™ 3D 25e ARF is a 3D-capable sport plane designed to make the transition from sport models to more challenging 3D aircraft a lot less demanding. Its large wing area and light wing loading offer very forgiving flight characteristics, especially in slow flight. It’s also compatible with a range of motor and propeller sizes so you can fine tune the power and performance to your skill level. Both the E-flite Power 25 and Power 32 brushless outrunner motors bolt to the firewall without any modifications. Experienced 3D pilots will appreciate the uniquely designed, machined aluminum 3D control arms that can handle the rigors of high-torque mini servos and large control throws. Sport aerobatics or stick-bending 3D, the Eratix 3D 25e is up for whatever you are.

Needed to Complete

In order to get your Eratix 3D 25e ARF airborne, you will need the following items:

Radio System: 6+ channels
Servo: 4 mini metal gear servos
Motor: Power 25 or Power 32 motor
Speed Control: 60-amp ESC
Prop: 13 x 6.5E, 14 x 7E or 15 x 8E, depending upon the motor selected 
Battery: 3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po