Radikal G-30 w/Zenoah motor

Features:

• Standard Flybared, Semi-Metal Flybared, Full-Metal Flybared, or Full Metal Flybarless Rotor Head (depending on model).
• Aluminum triple bearing metal swash plate with zero-slop bearing design.
• Black modular G-10 or carbon fiber side frames (depending on model) with aluminum ridge frame enforcements provides vibration dampening and a multi-point supported solid frame design.
• Designed for light weight, super rigidity, easily build process, and low maintenance.
• Top quality ball bearings, thrust bearings and one way bearing.
• Aluminum bearing blocks with double upper main shaft bearing and extra thrust bearing.
• Heavy Duty double bearing supported and double NSK One-way bearing autorotation design with extra large aluminum lower bearing support to provide no power lose and increased life.
• Advanced 4-point supported engine mounts for less vibration and highest rigidity.
• Adjustable gear ratios available: 6.0, 6.42 and 6.92.
• Designed to be powered by Zenoah G231, G26 or after market G27 and G30 modified gasoline engines. This side frame design accepts up to 4 BHP power output.
• Extra large clutch and clutch bell with Heavy Duty one way starter design to provide 100% power transfer.
• Advanced intake/exhaust cooling fan system and specially designed fan cover for maximum efficiency to cool the engine.
• Machined POM Main Gear and DuPont™ plastic parts.
• Automotive grade tail drive belt supported by aluminum timing pulley and idler pulley along with double bearing supported aluminum tail bearing coupler.
• Carbon adjustable tail pitch control rod.
• High gloss white (black/white body) or painted (red/yellow/black) fiberglass painted canopy (depending on model).
• Heavy duty landing gear.

Specifications:

• Length: 55 inch / 1397 mm
• Height: 17 inch / 432mm
• Main Rotor Diameter: 62.2 inch / 1580 mm (with optional RotorTech™ 710mm)
• Tail rotor diameters: 11.1 inch / 282.5 mm (with optional RotorTech™ 105mm)
• Engine: Zenoah™ Z-231, 26 or Modified Z-27 and Z-30 gasoline engine.
• Start method: Top Hex start or Optional pull start.
• Dry Weight: approximately 5 kg / 11 lbs. when full load tested with 5 Futaba digital servos, Futaba 611 Gyro, Futaba 2.4G receiver, Li-Po Receiver battery and Century 3D Torpedo Slim Muffler.

Just Provide ( Items required to fly but not included ):

• 1x 690mm-710mm Main Blades.
• 1x 6-Channel or better Radio Transmitter system capable of 120 degree eCCPM mixing.
  (7 Channels or better recommended, for governor)
• 1x 6-Channel or better Receiver and Receiver Battery.
  (7 Channels or better recommended, for governor)
• 1x Zenoah Z-231, 26 or Modified Z-27 and Z-30 gasoline engine.
• 1x Muffler.
• 5x Sport line or better Servos.
• 1x Gyro (Heading Lock/Hold recommended) for flybared head, or 3-Axis Flybarless Gyro System for the Flybarless Head.
• 1x Governor (optional but recommended)
• 1x Crystal Set. (if using non-2.4GHz radio sytem)
• 1x 87 to 92 Octane Gasoline.
• 1x 2-Stroke Motor Oil.
• 1x Synthetic Oil/Grease.
• 1x Pull Start System or Starting Equipment.
• 1x RC Helicopter Tools.