Triton EQ2

FEATURES: Charges 1-24 cell NiCd, NiMH (1.2-28.0V), 1-6 cell LiPo, Li-Ion,
LiFe (3.3, 3.6 or 3.7V cells)
Adjustable charge current from 0.1-8 amps makes this charger ideal
for many applications including tiny to large electric planes and
helis, TX and RX batteries, field batteries and more
0.1-3.0A adjustable discharge current
Built-in balancing for up to 6S LiPo, Li-Ion or LiFe (A123) cells
with FlightPower and ElectriFly adapters (GPMM3200 and GPMM3201)
Precision peak detection with adjustable sensitivity for NiCd and
NiMH batteries
Constant current/constant voltage charge method for Pb and
lithiums
Performs 1 to 10 cycles on NiCd and NiMH batteries, and recalls all
data
Configures up to 10 batteries in memory for instant, easy recall
and charger setup
Adjustable discharge cutoff voltages for NiCd/MH, pre-set voltages
for Pb and lithiums
Temperature sensing capabilities (GPMM3151 Thermal Probe available
separately)
Top-off charge feature fully charges NiMHs without overheating
Reversed LCD with backlight plus a 0-45° adjustable view angle
clearly displays input and output volts, peak volts, average
discharge volts, charge and discharge capacity, currents and time
data for 10 cycles, errors and individual lithium cell voltages
Banana plugs on DC input with mating gator clips
Safety features include cool-off time delay, maximum NiMH charge
input, fast charge safety timer, current overload and reverse
polarity protection
Warning messages for improper input voltage, poor connections,
unsuitable battery condition, reverse polarity on output
Built-in cooling fan, for better charge efficiency and extended
charger life
One year limited warranty

INCLUDES: ElectriFly AC/DC Triton2 EQ with alligator clips, ElectriFly and
FlightPower adapters, and instruction manual

REQUIRES: Charge leads depending on battery type
Matching discharge leads depending on battery type
SPECS: AC Input Voltage: 110V 60Hz - 240V 50Hz (detachable AC cord)
DC Input: 11-15.0V, banana plugs with mating gator clips included
Number of Outputs: One
Battery Types, # cells: 1-24 NiCd, NiMH (1.2-28.0V)
1-6 LiPo, Li-Ion, LiFe (3.3, 3.6 or 3.7V cells)
6, 12, 24V Pb (2V per cell)
Fast Charge Current: 0.1-8.0A linear NiCd, NiMH, auto mode
0.1-8.0A for lithiums (1C max) and Pb
120W max DC, 100W max AC
Fast Charge Termination: Peak detection NiCd, NiMH, cc/cv for Pb and
lithiums, optional thermal cutoff for all battery types
Trickle Current (NiCd/MH only): 0-300mA
Peak Sensitivity (NiCd/MH only): NiCd 5-20mV, NiMH 3-15mV
Peak Delay at Start (NiCd/MH only): 0-60 minutes
Fast Charge Safety Timer: 0-990 minutes
Max. Charge Cap: 0-9900mAh
NiMH Top Off Charge: 0-1000mA
Lithium Balancing Accuracy: 5mV per cell
Lithium Balancing Connector: ElectriFly and FlightPower adapters
included
Lithium Max. Node Current: 300mA
*Thermal Cutoff: 50-150°F (10-65°C)
Discharge Current: 0.1-3.0A
Discharge Cutoff Voltage: NiCd, NiMH 0.5-1.2V per cell
LiPo and Li-Ion 3.0V per cell
LiFe 2.5V per cell
Pb fixed at 1.8V per cel
Cycle Count (NiCd/MH only): 1-10 cycles
Cycle Time Delay (NiCd/MH only): 1-60 minutes
Battery Memories: 10 battery memories
Programming Controls: Dial and 2 pushbuttons
Display Type: 2x16 reversed LCD w/backlight & adjustable view angle
Audible Indicators: 10 melodies, on/off
Main Output Connection: Banana jacks
Case Material: Aluminum and ABS plastic
Cooling System: Built-in fan
Current Overload: Solid state